Java-Gaming.org    
Featured games (78)
games approved by the League of Dukes
Games in Showcase (429)
Games in Android Showcase (89)
games submitted by our members
Games in WIP (467)
games currently in development
News: Read the Java Gaming Resources, or peek at the official Java tutorials
 
    Home     Help   Search   Login   Register   
Pages: [1]
  ignore  |  Print  
  Someone with ATI Radeon 9700 mobility and Linux?  (Read 3953 times)
0 Members and 1 Guest are viewing this topic.
Offline jrt

Senior Newbie




Java games rock!


« Posted 2005-06-20 12:22:39 »

Hi, i had two week ago Linux installed, and i used jogl with it. My problem is that hardware acceleration is off in Linux with an ATI Radeon 9700 mobility. I tried put it on, but its impossible... I had to use WinXP for jogl development but i like Linux. Someone know how put hardware acceleration of the video card in Linux? Some driver maybe? Thx for reply, i hope use Linux with hardware acceleration some day  Undecided

PD: In ATI web page there is any driver for this video card in linux (i think), i have seen often.
Offline Soulfly32

Senior Newbie





« Reply #1 - Posted 2005-06-20 12:42:13 »

HI there,

the ATI 9700 MOB is compatible to linux. And you can use the driver on
https://support.ati.com/ics/support/default.asp?deptID=894&task=knowledge&folderID=27

The installation should be clear.
I did it myself and its running. Maybe you can tell me your distribution.
Maybe i can help with the installing.

greetz soulfly

_____________________________________
www.soulfly-design.de
www.soulflyhome.com
Offline jrt

Senior Newbie




Java games rock!


« Reply #2 - Posted 2005-06-20 16:52:38 »

This is the page i told you. There are drivers for ATI Radeon 9700, but no for ATI Radeon 9700 Mobility (i think). I enter in Linux x86 # Notebooks with ATI Graphics, and there are nothing to download. What driver must i download for a Mobility ATI Radeon 9700 ? Thx.

PD: I use Mandrake 10.2 (Mandrake 2005LE). I put 2D accleration, but no 3D acceleration. The renderer that Ati Radeon 9700 MOBILITY uses is MesaGL.
Games published by our own members! Check 'em out!
Legends of Yore - The Casual Retro Roguelike
Offline Soulfly32

Senior Newbie





« Reply #3 - Posted 2005-06-20 17:39:41 »

This mesa thing is the standart of X to use if it doesn't know the card.

Quote
There are drivers for ATI Radeon 9700, but no for ATI Radeon 9700 Mobility (i think)

Thats not true, the driver from ATI is for chips since Radeon 8500 also including the mobile variants of those.

You have to use the driver Installer (Size: ca 35Mb)

in console:
su + pass (go to root)
./fgrlx...run
Install it for you x-version FreeX86 or Xorg
fglrxconfig (try to use correct settings save xorg.conf)
restart X or the the whole linux

after that try glxgears in console,
when you achieve more then 1000 FPS (i had 2100 FPS) thn everthing i fine

_____________________________________
www.soulfly-design.de
www.soulflyhome.com
Offline jrt

Senior Newbie




Java games rock!


« Reply #4 - Posted 2005-06-20 17:43:51 »

 Shocked, i have to try this!. Thx for reply. Wink
Offline jrt

Senior Newbie




Java games rock!


« Reply #5 - Posted 2005-06-20 20:07:17 »

I cant configure the ati drivers. I have seen that 9700 mobility isnt supported. 9600 and 9600 M9 are supported, but 9700 mobility (is the same that 9600 M10) isnt supported. What a pity  Cry. Thx for the help. When 9700 ati radeon mobility (9600 m10) drivers exists then i will use linux. Thx for all.
Offline Soulfly32

Senior Newbie





« Reply #6 - Posted 2005-06-20 20:11:07 »

Hmm don't give it up.
You see i have installed the driver on my Linux.
And I have a 9700 Mobility running under it with 3D Support.
And from where do you have the info, that a 9700 Mod don't do its work on linux?
Tell me please what you've done, so i can help you.
Can you start the installer or do you have problems with fgrlxconfig.
When your are new to linux, then you must know it is hard to install something on linux for the first time.

_____________________________________
www.soulfly-design.de
www.soulflyhome.com
Offline jrt

Senior Newbie




Java games rock!


« Reply #7 - Posted 2005-06-20 23:00:10 »

Hi again. I download the installer and install it. First i do "su root" and install the driver in automatic mode. With fglrxconfig is when i have problems. It need information that i dont know exactly what choose. I tried some differents configuration, but ati yet use MesaGL renderer, and glxgears have 300 fps only. In the ati linux driver there is a link where tell us the video cards supported.

http://www2.ati.com/drivers/linux/linux_8.14.13-inst.html#172394

this is the address. There is a video card supported that i dont know if it is 9700, it is the X700,  is it the same?

What distribution of linux are you using?
Thanks for the help
Offline Soulfly32

Senior Newbie





« Reply #8 - Posted 2005-06-20 23:20:32 »

Hi supportlist says ati 9600 Mobility ok thats it. The card is support.
They have the Layout and the 9700 Mob has only a higher frequency.

Ok i use Suse 9.3 Ger
man distribution but the installation should be the same.

You have only to use the driver installer once then you can use the fglrxconfig whenever you want.
fglrxconfig seems to be hard piece to beat for the first time but it is not hard as it seems.
Fglrxconfig gives you suggestions which might be fitting for your system. The only thing that is really important is
the frequency of the monitor (to be sure use 60Hz for the beginning) and resolution.

What information do you need for example?

Did you go through the whole fglrxconfig or did you break it up during setting up?
Now i let you know that you cannot do anything wrong which can not be reset.
Backup the Xorg.conf out of /etc/X11
If something is broken then you copy it back in text mode.

After finishing all you only have to look at Xorg.conf again to be sure the "dri" module is
written down in it. and everything should be fine at last!

hope this will help ask if you habe a problem

_____________________________________
www.soulfly-design.de
www.soulflyhome.com
Offline girvine

Junior Member




Java games rock!


« Reply #9 - Posted 2005-06-21 07:58:06 »

One of my French colleagues has had Redhat 9 + XFree86 + DRI with on a Dell Inspiron 9100 w/ Radeon 9700 Mobility successfully running some time ago.  It's definitely possible.

G.
Games published by our own members! Check 'em out!
Legends of Yore - The Casual Retro Roguelike
Offline jrt

Senior Newbie




Java games rock!


« Reply #10 - Posted 2005-06-21 13:49:01 »

Nothing, i cant configure well the ati card. I tried a lot of differents configuration but i cant find the correct way. The opengl renderer is always MesaGL renderer. I have a panoramic flat screen, its possible that it is a problem, i dont know. Now GLX is used by ati driver, but opengl is MesaGL. Thx for help me. I will see in the web, now that i know that its possible to configure the ati card in my computer. It may be Mandrake the problem? Mandrake seems to use only xorg... Well, i will try to search information of this in google.
Offline Soulfly32

Senior Newbie





« Reply #11 - Posted 2005-06-21 17:31:03 »

Xorg is the best!
please post your /etc/Xorg.conf in here.
Maybe i can see whats wrong.

_____________________________________
www.soulfly-design.de
www.soulflyhome.com
Offline jrt

Senior Newbie




Java games rock!


« Reply #12 - Posted 2005-06-21 22:36:14 »

I tried to paste all code of xorg.conf but it is very large for paste it here.
I will put in packages:
# **********************************************************************
# DRI Section
# **********************************************************************
Section "dri"
# Access to OpenGL ICD is allowed for all users:
    Mode 0666
# Access to OpenGL ICD is restricted to a specific user group:
#    Group 100    # users
#    Mode 0660
EndSection

# **********************************************************************
# Module section -- this  section  is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
Section "Module"

# This loads the DBE extension module.

    Load        "dbe"     # Double buffer extension

# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
    SubSection  "extmod"
      Option    "omit xfree86-dga"   # don't initialise the DGA extension
    EndSubSection

# This loads the Type1 and FreeType font modules
    Load        "type1"
    Load        "freetype"

# This loads the GLX module
    Load        "glx"   # libglx.a
    Load        "dri"   # libdri.a

EndSection

# **********************************************************************
# Files section.  This allows default font and rgb paths to be set
# **********************************************************************

Section "Files"

# The location of the RGB database.  Note, this is the name of the
# file minus the extension (like ".txt" or ".db").  There is normally
# no need to change the default.

    RgbPath   "/usr/X11R6/lib/X11/rgb"

# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#
# If you don't have a floating point coprocessor and emacs, Mosaic or other
# programs take long to start up, try moving the Type1 and Speedo directory
# to the end of this list (or comment them out).
#

#    FontPath   "/usr/X11R6/lib/X11/fonts/local/"
    FontPath   "/usr/X11R6/lib/X11/fonts/misc/"
    FontPath   "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
#    FontPath   "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
    FontPath   "/usr/X11R6/lib/X11/fonts/Type1/"
    FontPath   "/usr/X11R6/lib/X11/fonts/Speedo/"
    FontPath   "/usr/X11R6/lib/X11/fonts/75dpi/"
#    FontPath   "/usr/X11R6/lib/X11/fonts/100dpi/"

# The module search path.  The default path is shown here.

#    ModulePath "/usr/X11R6/lib/modules"

EndSection

# **********************************************************************
# Server flags section.
# **********************************************************************

Section "ServerFlags"

# Uncomment this to cause a core dump at the spot where a signal is
# received.  This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging

#    Option "NoTrapSignals"

# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.

#    Option "DontZap"

# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences.  This allows clients to receive these key events.

#    Option "Dont Zoom"

# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.

#    Option "DisableVidModeExtension"

# Uncomment this to enable the use of a non-local xvidtune client.

#    Option "AllowNonLocalXvidtune"

# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.

#    Option "DisableModInDev"

# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).

#    Option "AllowNonLocalModInDev"

EndSection
Offline jrt

Senior Newbie




Java games rock!


« Reply #13 - Posted 2005-06-21 22:37:09 »

# **********************************************************************
# Input devices
# **********************************************************************

# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************

Section "InputDevice"

    Identifier   "Keyboard1"
    Driver   "kbd"
# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.

#    Option "Protocol"   "Xqueue"

    Option "AutoRepeat" "500 30"

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
#    Option "Xleds"      "1 2 3"

#    Option "LeftAlt"    "Meta"
#    Option "RightAlt"   "ModeShift"

# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a non-U.S.
# keyboard, you will probably want to use:
#    Option "XkbModel"   "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
#    Option "XkbModel"   "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#    Option "XkbLayout"  "de"
# or:
#    Option "XkbLayout"  "de"
#    Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#    Option "XkbOptions" "ctrl:swapcaps"

# These are the default XKB settings for XFree86
#    Option "XkbRules"   "xfree86"
#    Option "XkbModel"   "pc101"
#    Option "XkbLayout"  "us"
#    Option "XkbVariant" ""
#    Option "XkbOptions" ""

#    Option "XkbDisable"

    Option "XkbRules"   "xfree86"
    Option "XkbModel"   "pc101"
    Option "XkbLayout"   "es"

EndSection


# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************

Section "InputDevice"

# Identifier and driver

    Identifier   "Mouse1"
    Driver "mouse"
    Option "Protocol"   "ImPS/2"
    Option "ZAxisMapping"   "4 5"
    Option "Device"     "/dev/input/mice"

# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.

#    Option "Protocol"   "Xqueue"

# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.

#    Option "BaudRate"   "9600"
#    Option "SampleRate" "150"

# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)

#    Option "Emulate3Buttons"
#    Option "Emulate3Timeout"    "50"

# ChordMiddle is an option for some 3-button Logitech mice

#    Option "ChordMiddle"

EndSection


# **********************************************************************
# Other input device sections
# this is optional and is required only if you
# are using extended input devices.  This is for example only.  Refer
# to the XF86Config man page for a description of the options.
# **********************************************************************
#
# Section "InputDevice"
#    Identifier  "Mouse2"
#    Driver      "mouse"
#    Option      "Protocol"      "MouseMan"
#    Option      "Device"        "/dev/mouse2"
# EndSection
#
# Section "InputDevice"
#    Identifier "spaceball"
#    Driver     "magellan"
#    Option     "Device"         "/dev/cua0"
# EndSection
#
# Section "InputDevice"
#    Identifier "spaceball2"
#    Driver     "spaceorb"
#    Option     "Device"         "/dev/cua0"
# EndSection
#
# Section "InputDevice"
#    Identifier "touchscreen0"
#    Driver     "microtouch"
#    Option     "Device"         "/dev/ttyS0"
#    Option     "MinX"           "1412"
#    Option     "MaxX"           "15184"
#    Option     "MinY"           "15372"
#    Option     "MaxY"           "1230"
#    Option     "ScreenNumber"   "0"
#    Option     "ReportingMode"  "Scaled"
#    Option     "ButtonNumber"   "1"
#    Option     "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
#    Identifier "touchscreen1"
#    Driver     "elo2300"
#    Option     "Device"         "/dev/ttyS0"
#    Option     "MinX"           "231"
#    Option     "MaxX"           "3868"
#    Option     "MinY"           "3858"
#    Option     "MaxY"           "272"
#    Option     "ScreenNumber"   "0"
#    Option     "ReportingMode"  "Scaled"
#    Option     "ButtonThreshold"    "17"
#    Option     "ButtonNumber"   "1"
#    Option     "SendCoreEvents"
# EndSection

# **********************************************************************
# Monitor section
# **********************************************************************

# Any number of monitor sections may be present

Section "Monitor"
    Identifier  "Monitor0"
    HorizSync   31.5-90
    VertRefresh 60
    Option "DPMS"

# === mode lines based on GTF ===
# VGA @ 100Hz
# Modeline "640x480@100" 43.163 640 680 744 848 480 481 484 509 +hsync +vsync
# SVGA @ 100Hz
# Modeline "800x600@100" 68.179 800 848 936 1072 600 601 604 636 +hsync +vsync
# XVGA @ 100Hz
# Modeline "1024x768@100" 113.309 1024 1096 1208 1392 768 769 772 814 +hsync +vsync
# 1152x864 @ 60Hz
# Modeline "1152x864@60" 81.642 1152 1216 1336 1520 864 865 868 895 +hsync +vsync
# 1152x864 @ 85Hz
# Modeline "1152x864@85" 119.651 1152 1224 1352 1552 864 865 868 907 +hsync +vsync
# 1152x864 @ 100Hz
# Modeline "1152x864@100" 143.472 1152 1232 1360 1568 864 865 868 915 +hsync +vsync
# 1280x960 @ 75Hz
# Modeline "1280x960@75" 129.859 1280 1368 1504 1728 960 961 964 1002 +hsync +vsync
# 1280x960 @ 100Hz
# Modeline "1280x960@100" 178.992 1280 1376 1520 1760 960 961 964 1017  +hsync +vsync
# SXGA @ 100Hz
# Modeline "1280x1024@100" 190.960 1280 1376 1520 1760 1024 1025 1028 1085 +hsync +vsync
# SPEA GDM-1950 (60Hz,64kHz,110MHz,-,-): 1280x1024 @ V-freq: 60.00 Hz, H-freq: 63.73 KHz
# Modeline "GDM-1950"  109.62  1280 1336 1472 1720  1024 1024 1026 1062 -hsync -vsync
# 1600x1000 @ 60Hz
# Modeline "1600x1000" 133.142 1600 1704 1872 2144 1000 1001 1004 1035 +hsync +vsync
# 1600x1000 @ 75Hz
# Modeline "1600x1000" 169.128 1600 1704 1880 2160 1000 1001 1004 1044 +hsync +vsync
# 1600x1000 @ 85Hz
# Modeline "1600x1000" 194.202 1600 1712 1888 2176 1000 1001 1004 1050 +hsync +vsync
# 1600x1000 @ 100Hz
# Modeline "1600x1000" 232.133 1600 1720 1896 2192 1000 1001 1004 1059 +hsync +vsync
# 1600x1024 @ 60Hz
# Modeline "1600x1024" 136.385 1600 1704 1872 2144 1024 1027 1030 1060 +hsync +vsync
# 1600x1024 @ 75Hz
# Modeline "1600x1024" 174.416 1600 1712 1888 2176 1024 1025 1028 1069 +hsync +vsync
# 1600x1024 @ 76Hz
# Modeline "1600x1024" 170.450 1600 1632 1792 2096 1024 1027 1030 1070 +hsync +vsync
# 1600x1024 @ 85Hz
# Modeline "1600x1024" 198.832 1600 1712 1888 2176 1024 1027 1030 1075 +hsync +vsync
# 1920x1080 @ 60Hz
# Modeline "1920x1080" 172.798 1920 2040 2248 2576 1080 1081 1084 1118 -hsync -vsync
# 1920x1080 @ 75Hz
# Modeline "1920x1080" 211.436 1920 2056 2264 2608 1080 1081 1084 1126 +hsync +vsync
# 1920x1200 @ 60Hz
# Modeline "1920x1200" 193.156 1920 2048 2256 2592 1200 1201 1203 1242 +hsync +vsync
# 1920x1200 @ 75Hz
# Modeline "1920x1200" 246.590 1920 2064 2272 2624 1200 1201 1203 1253 +hsync +vsync
# 2048x1536 @ 60
# Modeline "2048x1536" 266.952 2048 2200 2424 2800 1536 1537 1540 1589 +hsync +vsync
# 2048x1536 @ 60
# Modeline "2048x1536" 266.952 2048 2200 2424 2800 1536 1537 1540 1589 +hsync +vsync
# 1400x1050 @ 60Hz M9 Laptop mode
# ModeLine "1400x1050" 122.000 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync
# 1920x2400 @ 25Hz for IBM T221, VS VP2290 and compatible display devices
# Modeline "1920x2400@25" 124.620 1920 1928 1980 2048 2400 2401 2403 2434 +hsync +vsync
# 1920x2400 @ 30Hz for IBM T221, VS VP2290 and compatible display devices
# Modeline "1920x2400@30" 149.250 1920 1928 1982 2044 2400 2402 2404 2434 +hsync +vsync

EndSection

Offline jrt

Senior Newbie




Java games rock!


« Reply #14 - Posted 2005-06-21 22:38:07 »


# **********************************************************************
# Graphics device section
# **********************************************************************

# Any number of graphics device sections may be present

# Standard VGA Device:

Section "Device"
    Identifier  "Standard VGA"
    VendorName  "Unknown"
    BoardName   "Unknown"

# The chipset line is optional in most cases.  It can be used to override
# the driver's chipset detection, and should not normally be specified.

#    Chipset     "generic"

# The Driver line must be present.  When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module.  Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.

    Driver      "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for.  When this line isn't present, a device
# section can only match up with the primary video device.  For PCI
# devices a line like the following could be used.  This line should not
# normally be included unless there is more than one video device
# installed.

#    BusID       "PCI:0:10:0"

#    VideoRam    256

#    Clocks      25.2 28.3

EndSection

# === ATI device section ===

Section "Device"
    Identifier                          "ATI Graphics Adapter"
    Driver                              "fglrx"
# ### generic DRI settings ###
# === disable PnP Monitor  ===
    #Option                              "NoDDC"
# === disable/enable XAA/DRI ===
    Option "no_accel"                   "no"
    Option "no_dri"                     "no"
# === misc DRI settings ===
    Option "mtrr"                       "off" # disable DRI mtrr mapper, driver has its own code for mtrr
# ### FireGL DDX driver module specific settings ###
# === Screen Management ===
    Option "DesktopSetup"               "0x00000000"
    Option "MonitorLayout"              "AUTO, AUTO"
    Option "IgnoreEDID"                 "off"
    Option "HSync2"                     "unspecified"
    Option "VRefresh2"                  "unspecified"
    Option "ScreenOverlap"              "0"
# === TV-out Management ===
    Option "NoTV"                       "yes"     
    Option "TVStandard"                 "NTSC-M"     
    Option "TVHSizeAdj"                 "0"     
    Option "TVVSizeAdj"                 "0"     
    Option "TVHPosAdj"                  "0"     
    Option "TVVPosAdj"                  "0"     
    Option "TVHStartAdj"                "0"     
    Option "TVColorAdj"                 "0"     
    Option "GammaCorrectionI"           "0x00000000"
    Option "GammaCorrectionII"          "0x00000000"
# === OpenGL specific profiles/settings ===
    Option "Capabilities"               "0x00000000"
# === Video Overlay for the Xv extension ===
    Option "VideoOverlay"               "on"
# === OpenGL Overlay ===
# Note: When OpenGL Overlay is enabled, Video Overlay
#       will be disabled automatically
    Option "OpenGLOverlay"              "off"
# === Center Mode (Laptops only) ===
    Option "CenterMode"                 "off"
# === Pseudo Color Visuals (8-bit visuals) ===
    Option "PseudoColorVisuals"         "off"
# === QBS Management ===
    Option "Stereo"                     "off"
    Option "StereoSyncEnable"           "1"
# === FSAA Management ===
    Option "FSAAEnable"                 "no"
    Option "FSAAScale"                  "1"
    Option "FSAADisableGamma"           "no"
    Option "FSAACustomizeMSPos"         "no"
    Option "FSAAMSPosX0"                "0.000000"
    Option "FSAAMSPosY0"                "0.000000"
    Option "FSAAMSPosX1"                "0.000000"
    Option "FSAAMSPosY1"                "0.000000"
    Option "FSAAMSPosX2"                "0.000000"
    Option "FSAAMSPosY2"                "0.000000"
    Option "FSAAMSPosX3"                "0.000000"
    Option "FSAAMSPosY3"                "0.000000"
    Option "FSAAMSPosX4"                "0.000000"
    Option "FSAAMSPosY4"                "0.000000"
    Option "FSAAMSPosX5"                "0.000000"
    Option "FSAAMSPosY5"                "0.000000"
# === Misc Options ===
    Option "UseFastTLS"                 "0"
    Option "BlockSignalsOnLock"         "on"
    Option "UseInternalAGPGART"         "yes"
    Option "ForceGenericCPU"            "no"
    BusID "PCI:1:0:0"    # vendor=1002, device=4e50
    Screen 0
EndSection

# **********************************************************************
# Screen sections
# **********************************************************************

# Any number of screen sections may be present.  Each describes
# the configuration of a single screen.  A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
    Identifier  "Screen0"
    Device      "ATI Graphics Adapter"
    Monitor     "Monitor0"
    DefaultDepth 24
    #Option "backingstore"

    Subsection "Display"
        Depth       24
        Modes       "1024x768"
        ViewPort    0 0  # initial origin if mode is smaller than desktop
#        Virtual     1280 1024
    EndSubsection
EndSection

# **********************************************************************
# ServerLayout sections.
# **********************************************************************

# Any number of ServerLayout sections may be present.  Each describes
# the way multiple screens are organised.  A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option.  In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.

Section "ServerLayout"

# The Identifier line must be present
    Identifier  "Server Layout"

# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens.  The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen.

    Screen "Screen0"

# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used.  Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".

    InputDevice "Mouse1" "CorePointer"
    InputDevice "Keyboard1" "CoreKeyboard"

EndSection

### EOF ###
Offline jrt

Senior Newbie




Java games rock!


« Reply #15 - Posted 2005-06-21 22:39:12 »

This is my actual xorg.conf.
Offline Soulfly32

Senior Newbie





« Reply #16 - Posted 2005-06-21 22:50:57 »

This seems to be correct nice work!

Now i have another idea. I have many of these  Roll Eyes

Did you do the custom or the automatic installation.
When you did the automatic please try the custom one and choose
Xorg. Because i think that no kernel modules have been made during installing.
give it a try
This was my Problem too. Grin

_____________________________________
www.soulfly-design.de
www.soulflyhome.com
Offline jrt

Senior Newbie




Java games rock!


« Reply #17 - Posted 2005-06-21 22:55:22 »

ok, i install custom xorg now.
Offline jrt

Senior Newbie




Java games rock!


« Reply #18 - Posted 2005-06-21 23:07:33 »

Nothing. I have reinstalled with xorg but it seems to be th same... MesaGL i begin to hate MesaGL Angry  I have reinstalled without quit older installation, is it the right way to reinstall? Well, some idea?  Embarrassed

I am downloading SuSe 9.3. Its possible that Mandrake 10.2 was incompatible with this drivers... it is an idea..
Offline Soulfly32

Senior Newbie





« Reply #19 - Posted 2005-06-21 23:29:18 »

I don't think that this combination makes any problems.
But maybe something within the libs of mandrake.
Tried this driver with Suse, Knoppix and Unbuntu and it works
i really dunno

_____________________________________
www.soulfly-design.de
www.soulflyhome.com
Offline Soulfly32

Senior Newbie





« Reply #20 - Posted 2005-06-21 23:34:47 »

try this as root with X deactivated


console
>init 3
>sax2 -r -m 0=fglrx -b /usr/X11R6/lib/sax/profile/firegl -i
>startx

_____________________________________
www.soulfly-design.de
www.soulflyhome.com
Offline jrt

Senior Newbie




Java games rock!


« Reply #21 - Posted 2005-06-21 23:57:55 »

i cant use nit3 and sax2 commands. How do i close X sesion? i know how start it but i don know how end it.
I will use SuSe 9.3. While i will use winxp only. Ths for all the help. I have few time with linux, its possible that i made something wrong.
Offline Soulfly32

Senior Newbie





« Reply #22 - Posted 2005-06-22 00:03:47 »

sorry i meant init 3
but when you want to use suse 93 its ok.
i like it

_____________________________________
www.soulfly-design.de
www.soulflyhome.com
Offline jrt

Senior Newbie




Java games rock!


« Reply #23 - Posted 2005-06-22 00:32:58 »

im going to try init 3. I have seen that suse 9.3 is the best distribution for desktop. Mandrake is great too, but i want to try other distribution, and suse seems great.
Offline quintesse

Junior Member




Java games rock!


« Reply #24 - Posted 2005-06-22 16:42:00 »

Could it maybe be a conflict between the Mesa libs and the ones installed by the Ati driver?
Just a thought because the same happened to me with the nVidia drivers and I had to make some changes like the ones described in this thread: https://www.redhat.com/archives/fedora-list/2003-November/msg00756.html
The thread is about nVidea on RedHat/Fedora so won't be of any help but there is a possibility that the cause might be similar in your case maybe?
Pages: [1]
  ignore  |  Print  
 
 
You cannot reply to this message, because it is very, very old.

 

Add your game by posting it in the WIP section,
or publish it in Showcase.

The first screenshot will be displayed as a thumbnail.

xsi3rr4x (81 views)
2014-04-15 18:08:23

BurntPizza (73 views)
2014-04-15 03:46:01

UprightPath (84 views)
2014-04-14 17:39:50

UprightPath (67 views)
2014-04-14 17:35:47

Porlus (84 views)
2014-04-14 15:48:38

tom_mai78101 (107 views)
2014-04-10 04:04:31

BurntPizza (167 views)
2014-04-08 23:06:04

tom_mai78101 (263 views)
2014-04-05 13:34:39

trollwarrior1 (214 views)
2014-04-04 12:06:45

CJLetsGame (223 views)
2014-04-01 02:16:10
List of Learning Resources
by SHC
2014-04-18 03:17:39

List of Learning Resources
by Longarmx
2014-04-08 03:14:44

Good Examples
by matheus23
2014-04-05 13:51:37

Good Examples
by Grunnt
2014-04-03 15:48:46

Good Examples
by Grunnt
2014-04-03 15:48:37

Good Examples
by matheus23
2014-04-01 18:40:51

Good Examples
by matheus23
2014-04-01 18:40:34

Anonymous/Local/Inner class gotchas
by Roquen
2014-03-11 15:22:30
java-gaming.org is not responsible for the content posted by its members, including references to external websites, and other references that may or may not have a relation with our primarily gaming and game production oriented community. inquiries and complaints can be sent via email to the info‑account of the company managing the website of java‑gaming.org
Powered by MySQL Powered by PHP Powered by SMF 1.1.18 | SMF © 2013, Simple Machines | Managed by Enhanced Four Valid XHTML 1.0! Valid CSS!